Da-Lee Instarmac Permanent Pothole Repair
For use during all seasons, including winter months. Unlike cold mix products, this is a permanent cold asphalt solution.
$57.99
Instarmac Permanent Pothole Repair® is a suitable solution for roads, pavements, driveways and parking lots. The product can be trafficked instantly in wet, freezing and hot conditions and at the same time is compatible with the existing road surface. Instarmac Permanent Pothole Repair® can be applied at depths up to 50mm. (Greater depths can be achieved by applying the layer-on-layer method).
Ideal for the repair of potholes in roads, driveways and parking lots
- Instantly trafficable
- No waste
- Easy to use
- Suitable for planned and reactive repairs
- Use with SCJ Seal and Tack Coat Spray for a permanent repair
- Used in ALL weathers, climates and temperatures
- Depth: 10-50mm
- Resealable tubs
- Packaging / Coverage 22kg / 50lb
- Approx .1m2 at 12-15mm
Applications
Instarmac Permanent Pothole Repair® is a suitable solution for roads, pavements, driveways and parking lots. The product can be trafficked instantly in wet, freezing and hot conditions and at the same time is compatible with the existing road surface. Instarmac Permanent Pothole Repair® can be applied at depths up to 50mm. (Greater depths can be achieved by applying the layer-on-layer method).
Technical
Instarmac Permanent Pothole Repair® includes fully graded, high PSV interlocking aggregate and specially formulated bitumen and is supplied in recyclable 22.5kg/50lb containers.
Recommended Application
Pothole repairs can be achieved at any depth.
1. Ensure pothole is free of debris and standing water.
2. Apply Instarmac SCJ spray sealant to pothole edges.
3. Apply the product slightly proud of the pothole.
4. Compact with a hand tamper, or suitable mechanical alternative.
Storage
Store inside above 5°C/41°F.
Shelf Life
Shelf life in correct conditions for sealed goods is 6 months. Delivered on shrink wrapped pallets.
Handling Guidelines
Instarmac Permanent Pothole Repair® is manufactured and delivered within as short a time as possible to ensure fresh easy to lay material is supplied. It should be noted, if storage guidelines are not followed the material can appear stiff. By placing point load pressure on the bag, you will regain workability.
Health, Safety and Environmental
Please ensure that appropriate PPE is used when preparing, mixing and applying products. Always wash your hands before consuming food and make sure that materials are kept safely out of reach of children and animals. Please dispose of packaging and waste responsibly and in accordance with local authority requirements. A full material datasheet relating to this product is available from Da-Lee.
Quality Assurance
Our products are guaranteed against defective materials and manufacture, and will be replaced or money refunded if the goods do not comply with our promotional literature. We cannot however accept any liability arising from the application or use of our products because we have no direct or continuous control over where and how our products are used. All products are sold to our conditions of sale, copies of which can be obtained on request.
Technical Data
PSV: 60
Colour: Black
Coverage: Approx 1m² at 12-15mm compacted, depending on the surface regularity of the reinstatements.
Instarmac Permanent Pothole Repair® works differently from most cold asphalt products on the market. Commonly these types of products are manufactured using flux oils so that when it is stockpiled the asphalt stays plyable and soft. The problem with this however, is that the asphalt remains plyable and soft when applied into a pothole.
This very often causes the repair to fail especially in areas that will receive regular braking or turning. Most of these traditional products are also manufactured using a single size aggregate which leaves voids, creating weaknesses in the repair.
Instarmac Permanent Pothole Repair®is manufactured using an innovative formulation that reacts under compaction. This, combined with intelligently graded aggregate, which interlocks and leaves no voids, ensures a durable repair that can be trafficked as soon as compaction is complete.
Unlike bulk asphalt which hardens very slowly, Instarmac Permanent Pothole Repair®’s rapid setting properties make it ideal for areas of turning, braking and heavy traffic. This not only prevents disruption to motorists and traffic flow but provides a long term, first time, permanent solution that avoids costly repeat visits to the same pothole. The graph below demonstrates the products superior performance compared to oil based products.